Text Box: 264 Nevarez     El Paso, Texas 79927              866-444-4160 Text Box: This information is presented in good faith and represents typical industry standards and procedures.  Somar Industries expressly disclaims any liability for the end use of specifications or details presented here.  

Text Box: Description   Unicoat Plus Acrylic Finish is a 100% acrylic synthetic stucco finish for exterior use on above grade walls and previously coated surfaces.   Unicoat Plus Acrylic Finish can also be used over E.I.F.S. base coats, stucco, concrete surfaces, and all Unicoat base coats. Unicoat Plus Acrylic Finish comes in medium, coarse sand, and medium rilled textures.   Approved Substrates   Unicoat Plus Acrylic Finish can be applied over new and old stucco, concrete and masonry surfaces, painted surfaces (flat finish), and all one-coat and three coat base coats. When applying over new stucco and concrete surfaces, it is always recommended that walls be cured out completely and a coat of Unicoat Surface Primer 865 be applied. Make sure surfaces are clean before applying finish.   Mixing and Application   Unicoat Plus Acrylic Finish should be mixed in its own container using a low rpm drill mixer to ensure color uniformity and minimize air entrapment. Do not dilute Unicoat Acrylic Finish with more than one pint of clean potable water. Apply in one coat at approximately 1/8” thickness over substrate. Unicoat Plus Acrylic Finish can be applied by hand trowel application only. Spray application is possible in sand finish texture only, please consult manufacturer for proper procedure. It is highly recommended that a professional plastering applicator apply this product.     Dry Time and Shelf Life   Unicoat Plus Acrylic Finish should be stored in a cool dry place, away from direct sunlight and protected from extreme heat and freezing conditions. Always keep container closed when not in use. Unicoat Acrylic Finish has a shelf life of 12 months when these directions are followed.   Coverage   Unicoat Plus Acrylic Finish covers approximately 100-120 square feet per pail, depending on porosity of surface and texture. Dying time is 4 hours at 70° f if applied as per specifications. Protect from freeze or rain for 24hrs.   Limitations   Unicoat Plus Acrylic Finish must be applied to a clean surface free from all foreign matter, efflorescence, oil, dirt, and any other bond inhibiting materials. Do not use Unicoat Acrylic Finish in extreme heat and in freezing conditions. Painted surfaces should be at least several months old. All loose paint should be removed.   Warranties   Unicoat Plus Acrylic Finish can be warranted for up to 5 years when applied by a certified applicator and all specifications were met.   The sole warranty is replacement of materials used to correct defective materials; no other warranties are either expressed or implied.   Somar Industries, LTD 264 N. Nevarez Rd El Paso, Texas 79927 915-858-8080 915-858-8288 fax Info@somarindustries.com

Text Box: Product Data Sheet

View Printable Page (PDF File)